|
|
Unique Construction Tools from Smaller US Vendors -
most of these tools are not available in your neighborhood home or
building center!
ThumbSaver Magnetic Nail Setter Tool
Never Hit Your Thumb Again! Strong magnet holds a Nail, Staple, Screw ~ almost any fastener!
This ingenious tool designed and tested by real tradesmen lends a helping hand when driving nails, screws, fence staples, or just about any fastener.
You can use Thumb Saver on nearly any job from fine trim or craft work to the largest framing jobs, building fences, decks or installing joist hangers. Durable Aluminum with Comfortable Grip and Lightweight Design!
» Large ThumbSaver is 7 1/2 inches long w 7/8 inch grip
» Mini ThumbSaver is 6 inches long with 5/8 inch grip Packaging:
» Bonus pack: 1 large and 1 small thumbsaver in shrink-wrapped package, item # FW-TS001
Additional information and usage pictures
|
|
For the handy-person in all of us.
In Stock for immediate shipment!
Bonus pack: ( 1 Large & 1 Mini )
$ 10.95 per pk
$ 9.95 ea 2+ pks
Buy a case of 10 bonus packs for all your employees
$ 9.50 ea 10 pks
|
Bolt-Rite® Threaded Caps for 1/2", 5/8" and 7/8" Anchor Bolts
Anchor bolt caps keep the bolt threads clean and ready to use
Order extra Anchor Bolt Caps before you need them!
» A cap is included with each Anchor Bolt Holder, Holder/Spreader and Stabber; order extras here
» Color coded for ease of use Ordering information:
» ABC12: Orange for 1/2" anchor bolts
» ABC58: Blue for 5/8" anchor bolts
» ABC78: Green for 7/8" anchor bolts. NOTE: 7/8" caps have inspection ports for easy confirmation of correct bolt orientation.
See all Bolt-Rite products
|
|
Order extra Anchor Bolt Caps before you need them!
Anchor Bolt Caps:
1/2" = $0.10 ea
5/8" = $0.18 ea
7/8" = $0.28 ea
|
Bolt-Rite® Concrete Anchor Bolt Holders for 1/2", 5/8" and 7/8" Anchor Bolts
Includes matching threaded Bolt Cap
Set Anchor Bolts in concrete forms to correct depth & position in one easy, cost-effective operation
» Nail securely in the CORRECT POSITION before pouring concrete (especially helpful in fast curing climates).
» Built in guides allow quickly setting anchor bolts to correct depth and position for either 2x4 or 2x6 sill plates. Use Rite-Height Sleeves for other applications.
» Easily removed when concrete is cured by unthreading the Cap off of anchor bolt, removing nails, and sliding Bolt-Rite up and off the bolt.
» A threaded bolt Cap comes with each unit
» Color coded for ease of use Ordering information:
» ABH12: Orange for 1/2" anchor bolts
» ABH58: Blue for 5/8" anchor bolts
» ABH78: Green for 7/8" anchor bolts. NOTE: 7/8" caps have inspection ports for easy confirmation of correct bolt orientation.
See all Bolt-Rite products
|
|
NEW! Not yet available in most stores!
Save Time, Effort & Re-Work!
Anchor Bolt Holder with Cap:
1/2" = $1.14 ea
5/8" = $1.31 ea
7/8" = $1.39 ea
|
Bolt-Rite® Concrete Anchor Bolt Holder/Spreader for 1/2", 5/8" and 7/8" Anchor Bolts
Includes matching threaded Bolt Cap
Set Anchor bolts and spread concrete forms in one easy, cost-effective operation
» Nail securely in the CORRECT POSITION, before pouring concrete (especially helpful in fast curing climates).
» Built in guides allow quickly setting anchor bolts to correct depth and position for either 2x4 or 2x6 sill plates. Use Rite-Height Sleeves for other applications.
» Easily removed when concrete is cured by unthreading the Cap off of anchor bolt, removing nails, and sliding Bolt-Rite up and off the bolt.
» A threaded bolt Cap comes with each unit
» Color coded for ease of use Ordering information:
» ABHS12: Orange for 1/2" anchor bolts
» ABHS58: Blue for 5/8" anchor bolts
» ABHS78: Green for 7/8" anchor bolts. NOTE: 7/8" caps have inspection ports for easy confirmation of correct bolt orientation.
See all Bolt-Rite products
|
|
NEW! Not yet available in most stores!
Save Time, Effort & Re-Work!
Anchor Bolt Holder/Spreader with Cap:
1/2" = $1.63 ea
5/8" = $2.11 ea
7/8" = $2.34 ea
|
Bolt-Rite® Concrete Anchor Bolt Wet-Stabber for 1/2" Anchor Bolts
Includes matching threaded Bolt Cap
Quickly and Accurately insert 1/2" Anchor Bolts into wet concrete
» Built in positioning guides for quickly setting anchor bolts to correct depth and position for either 2x4 or 2x6 sill plates.
» Cap protects bolts from thread damage and concrete splash.
» Easily removed when concrete is cured by unthreading the Cap off of anchor bolt, and sliding Bolt-Rite up and off the bolt.
» A threaded bolt Cap comes with each unit Ordering information:
» ABS12: Orange for 1/2" anchor bolts
See all Bolt-Rite products
|
|
NEW! Not yet available in most stores!
Save time, effort & re-Work. And they are RE-USABLE!
Anchor Bolt 'Wet Stabber' with Cap:
1/2" = $1.15 ea
|
Bolt-Rite® Rite-Height Sleeves for 5/8" and 7/8" Anchor Bolts
Quickly and easily set your Concrete Anchor Bolts at the right height the 1st time!
Add Rite-Height Sleeves to vertically position bolts for quick, clean installation of Sill Plates and engineered STB bolts!
» Rite-Height Sleeves position bolts correctly for 3x Sill Plates, 5" or 6 3/4" embedment marked bolts.
» Available in sizes to fit standard bolts - and color coded for ease of use Ordering information:
» ABSL583: for 5/8" Anchor Bolts and 3x sills, blue
» ABSL585: for 5/8" Anchor Bolts and 5" embedment marks, blue
» ABSL5867: for 5/8" Anchor Bolts and 6-3/4" embedment marks , blue
» ABSL783: for 7/8" Anchor Bolts and 3x sills, green
» ABSL785: for 7/8" Anchor Bolts and 5" embedment marks, green
» ABSL7867: for 7/8" Anchor Bolts and 6-3/4" embedment marks, green
See all Bolt-Rite products
|
|
NEW! Not yet available in most stores!
Save time, effort & re-Work. And they are RE-USABLE!
For 5/8" bolts:
3x sill = $0.20 ea
5" mk = $0.25 ea
6-3/4" mk = $0.32 ea
For 7/8" bolts:
3x sill = $0.30 ea
5" mk = $0.35 ea
6-3/4" mk = $0.42 ea
|
Bolt-Rite® 9x9" and 14x14" Adjustable Templates for Anchor Bolts up to 1-1/2"
Ideal for setting Light Poles and Steel Columns
Bolt-Rite Templates are adjustable for multiple applications and made out galvanized steel for strength and reuseability 9" x 9" squares:
» 9x9" squares can take up to a 7/8" Anchor Bolt and can be set for bolt patterns from 4" to 6" centers
» 9"x9 templates have a 2-1/8" center hole for conduit if needed
» nail-on holes provided in eight places
» center-line marks for stringline or transit layout
» ABT9-58: 9x9 template for 5/8" Anchor Bolts
» ABT9-34: 9x9 template for 3/4" Anchor Bolts
» ABT9-78: 9x9 template for 7/8" Anchor Bolts 14" x 14" squares:
» 14x14" squares can take up to a 1-1/2" Anchor Bolt and can be set for bolt patterns from 6" to 10" centers
» 14x14 templates have a 2-1/8" center hole for conduit if needed
» nail-on holes provided in eight places
» center-line marks for stringline or transit layout
» ABT14-34: 14x14 template for 3/4" Anchor Bolts
» ABT14-78: 14x14 template for 7/8" Anchor Bolts
» ABt14-1: 14x14 template for 1" Anchor Bolts
» ABT14-114: 14x14 template for 1-1/4" Anchor Bolts
» ABT14-112: 14x14 template for 1-1/2" Anchor Bolts NOTE: Anchor Bolts shown for illustrative purpose only and are not included! Order separately.
See all Bolt-Rite products
|
|
Save time, effort, re-work. And they are RE-USABLE!
Adjustable anchor bolt templates:
9x9" = $ 19.82 ea
14x14" = $ 31.08 ea
|
Bolt-Rite® Concrete Form Board Spreaders
Position 6" and 8" concrete stem walls with ease!
Never waste time again measuring and cutting expensive stakes to make your concrete form spreaders.
» With predrilled nail holes and layout marks for 6" and 8" foundation walls you can speed through the form spreading operation.
» Narrow profile makes for easy trowelling.
» High visibility orange color will help you spot any forgotten areas. Ordering information:
» AFBS: Orange for high visibility
See all Bolt-Rite products
|
|
NEW! Not yet available in most stores!
Pre-drilled for 6" & 8" wall spacing
Concrete Form Spreaders:
$1.44 ea
|
Stair Pro™ - Concrete Stair Forming System
Take the pain and frustration out of forming concrete stairs.
The Stair Pro - Concrete Stair Forming Tools are the first product that takes the pain and frustration out of forming stairs.
» Stair Forming Tools allows you to adjust your tread and riser dimensions with easy to adjust and tighten locking knobs. Once set, the Stair Pro's are set on your top (or bottom) landing form board that has been setup up and braced. With the Stair Pro's in place you just slide you next riser board up in the form board slot in the Stair Pro and secure in place by tightening the form board knob on the tool locking the form board precisely in place. Ordering and packaging information:
» Stair Forming Tools - Set of 2 - in reusable storage bag (MSG-1)
» Made in the USA
See all Bolt-Rite products
|
|
Limited Time: FREE UPS Ground Shipping in Continental US!
Set of Two Stair Pro Forming Tools:
$ 429.00 per set
Spring Special:
$ 395.00 per set
and FREE Shipping
|
Bolt-Rite® Standoff Troweling Blocks for Bolt-Rite Anchor Bolt Holders
Extra clearance for troweling and finishing!
Stand-off troweling blocks raise the Anchor Bolt Holders and Holders w/Spreaders above the concrete, allowing room to finish trowel around the bolts and under the holders without having to remove them
» For construction projects that require the concrete forms and anchor bolt holders be left undisturbed for several days after pouring to be sure the concrete is not damaged or stressed during the curing process
» Troweling blocks snap onto the base of the Bolt-Rite Holders and Holders w/Spreaders
» Color coded for ease of use Ordering information:
» ATB58: for 5/8" Anchor Bolts, blue
» ATB78: for 7/8" Anchor Bolts, green
See all Bolt-Rite products
|
|
Simplify your finishing process!
Save time, effort & re-work. And they are RE-USABLE!
For 5/8" & 7/8" Holders & Spreaders:
5/8" = $ 0.78
7/8" = $ 0.81
|
|
|
How
We're Reducing our environmental impact
